Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 12, Article number: 17155 (2022)
Metrics details
The stimulation of photosynthesis is a strategy for achieving sustainable plant production. Red light is useful for plant growth because it is absorbed by chlorophyll pigments, which initiate natural photosynthetic processes. Ultraviolet (UV)-to-red wavelength-converting materials are promising candidates for eco-friendly plant cultures that do not require electric power. In this study, transparent films equipped with a UV-to-red wavelength-converting luminophore, the Eu3+ complex, were prepared on commercially available plastic films for plant growth experiments. The present Eu3+-based films absorb UV light and exhibit strong red luminescence under sunlight. Eu3+-painted films provide significant growth acceleration with size increment and biomass production for vegetal crops and trees in a northern region. The plants cultured with Eu3+-painted films had a 1.2-fold height and 1.4-fold total body biomass than those cultures without the Eu3+ luminophores. The present film can promote the plant production in fields of agriculture and forestry.
Sustainable scientific and technological developments for future plant production are among the most important challenges associated with supplying sufficient global food and bioenergy in terms of world population growth, which is expected to reach nearly nine billion people by 20501,2,3,4. Stimulating photosynthesis is a promising strategy to accelerate plant growth and biomass production5,6. Light energy is required by natural photosynthetic organisms such as higher plants, algae, and photosynthetic bacteria. In the initial stage of photosynthesis, chlorophyll pigments absorb sunlight and utilize solar photon energy for the production of bio-resources7. In particular, land plants contain the chlorophyll-a and b pigments in light-harvesting antenna and reaction center apparatuses, which absorb visible light in the red (Qy band: 600–700 nm) and blue (Soret band: 400–450 nm) regions. The effective wavelengths for photosynthesis agree well with the absorption bands. The light color also affects plant growth, productivity, morphology, and physiology8,9,10. The photosynthetic action spectra have revealed that red light for excitation in the Qy band provides the highest photosynthetic quantum yield11.
Sunlight is a sustainable energy source, however, it includes ultraviolet (UV) light, which is located in the high-energy wavelength region (200–400 nm). Various plants respond to UV light12,13,14. In particular, UV-A (320–400 nm) light affects not only photo-inhibition of photosystem(PS)-II15 but also increase of photosynthetic rate16. UV-B (295–320 nm) is known to induce damage of DNA15. Thus, shading the plants from solar UV light is one of the key strategies to suppress photoinhibition and photodamages of the plants. The plastic covering films used in greenhouses contain UV-blocking materials. The UV-blocking molecules convert UV light into thermal energy. In the past decade, wavelength-converting materials (WCM) have been reported to change the UV to red light for plant cultivation17,18,19,20,21. Utilizing WCMs under sunlight can be advantageous for filtering solar UV light and providing red light for efficient photosynthesis. The WCMs can promote sustainable agriculture and forestry without consuming the electricity such as plant factories equipped with LED devices. The trivalent europium (Eu3+) luminophore is a promising candidate for sustainable UV-to-red WCM22,23,24. The Eu3+ complex exhibits strong red luminescence based on the 4f–4f transitions by the attachment of organic ligands. The Eu3+ luminophore with a photosensitizer (hexafluoroacetylacetonato: hfa) and a stabilizer (triphenylphosphine oxide: TPPO), [Eu(hfa)3(TPPO)2] (Fig. 1a and Supplementary Fig. S1), shows a high conversion efficiency from UV to red light (emission quantum yield ≃ 70%) with almost no absorption bands in the visible-light region25. This material is also stable upon heating at 200 °C26 and under UV light irradiation27. Recently, we reported that a Eu3+ complex with tris(2,6-dimethoxyphenyl)phosphine oxide (TDMPPO, Fig. 1a and Supplementary Fig. S1) produces a transparent amorphous paint with red luminescence under UV light exposure28.
Transparent UV-to-red WCM film equipped with a Eu3+ luminophore. (a) Schematic of plant growth acceleration using WCM film (left) and molecular structures of [Eu(hfa)3(TPPO)2] and TDMPPO (right). (b) Photographs of agriculture film painted with or without WCM under daylight (upper) and UV irradiation (lower). (c) Solar spectra obtained without (black line) and with the WCM film (solid colors).
In this study, we first demonstrated plant growth acceleration using a novel transparent UV-to-red WCM with a strongly luminescent Eu3+ complex for agriculture and forestry under sunlight of the greenhouse conditions (Fig. 1a). The transparent UV-to-red WCM-film was prepared by coating a mixture of luminophore [Eu(hfa)3(TPPO)2] and the amorphous reagent TDMPPO on a commercially available plastic covering film for plant growth experiments. The Eu3+-painted WCM films significantly promoted the growth in size and biomass production of vegetal and tree plants.
A strongly luminescent Eu3+ complex, [Eu(hfa)3(TPPO)2], was used as a UV-to-red WCM. The amorphous formation of [Eu(hfa)3(TPPO)2] was analyzed using powder X-ray diffraction (PXRD). The PXRD patterns of [Eu(hfa)3(TPPO)2] and TDMPPO showed specific peaks due to the crystallinity of the compounds (Supplementary Fig. S2). [Eu(hfa)3(TPPO)2] and TDMPPO in a 1:2 molar ratio were dissolved in dichloromethane and evaporated to give a mixed solid. The obtained mixture exhibited broad PXRD signals, indicating that the mixture formed an amorphous phase (Supplementary Fig. S2).
A mixture of [Eu(hfa)3(TPPO)2] and TDMPPO was painted on a commercially available polyolefin-type covering film (thickness: 0.1 mm, C. I. Takiron Co., Osaka, Japan). The painted film was appeared to have clear transparency and bright red luminescence under UV irradiation (Fig. 1b). Confocal laser scanning microscopic analysis showed that the thickness of the painted film was approximately 60 µm (Supplementary Fig. S3). The amorphous Eu3+-based WCM on the polyolefin-type film was exposed to sunlight. The WCM film exhibits characteristic Eu3+ luminescence at 614 nm and absorption in the UV region (Fig. 1c). The intensity of solar light in the visible region was not decreased. These results revealed that the film covered with an amorphous Eu3+ complex performed as UV-to-red WCM without daylight suppression. In addition, WCM film had little influence on temperature of plant surface under sunlight (Supplementary Fig. S9).
The photophysical properties of the painted UV-to-red WCM films were evaluated in detail using spectroscopic techniques. The UV–Vis absorption spectra of the WCM film showed a π–π* transition band at 298 nm, which was attributed to the hfa ligands (Supplementary Fig. S5). The luminescence spectrum of the WCM film under UV irradiation exhibited characteristic emission peaks of the Eu3+ complex at 578, 592, 614, 650, and 699 nm, which correspond to the 4f–4f transitions derived from 5D0 → 7FJ (J = 0, 1, 2, 3, and 4), respectively (Supplementary Fig. S6). The excitation spectrum of the WCM film detected at the 614 nm emission also showed a π–π* transition band at 298 nm, which was similar to the UV–Vis absorption spectrum of WCM film (Supplementary Fig. S7). The luminescence lifetime of the amorphous Eu3+ complex was estimated to be 0.81 ms (Supplementary Fig. S8). Based on these photophysical data, the quantum efficiency of the 4f–4f transitions was calculated to be 64% (Supplementary Table S1). The radiative and non-radiative constants of the amorphous Eu3+ complex were calculated to be 7.9 × 102 and 4.4 × 102 s−1, respectively (Supplementary Table S1). The photophysical performance of the Eu3+-painted WCM film was similar to that of the original [Eu(hfa)3(TPPO)2] powder. A bright luminescent Eu3+-painted UV-to-red WCM film was successfully prepared for the plant growth experiments. The photophysical properties of the WCM film after the plant culture experiments were also analyzed by above spectroscopic methods (Supplementary Figs. S4, S6 and S8 and Supplementary Tables S1 and S2). The employed WCM films still exhibited red luminescence under UV light irradiation (Supplementary Fig. S4).
The WCM film was used for plant growth experiments on vegetal crops under sunlight (Fig. 2a). Ten Swiss chard plantlets were hydroponically cultured with and without WCM films in summer and winter. In summer, the Swiss chard cultured reached the plant size required for the harvest in 22 days, however, those cultured in winter took 60 days to reach the size for harvesting (Fig. 2b). The difference in harvest age originates from the ambient temperature during the season. The plant height at harvest can be monitored by non-destructive inspection, showing a close correlation with the yield during summer and winter independently (Fig. 2c). In winter, the plant height of Swiss chard cultured with the WCM film was 1.2-fold higher than that without the film. The effect of the WCM film was maintained during the experimental period (63 days). The total body biomass increased for the harvested Swiss chard cultured with the WCM film in winter, which was 1.4-fold larger than that without the WCM film (Fig. 2d). In summer, the plant height of Swiss chard cultured with the WCM film was similar to that without the WCM film. The specific effect of WCM films on total body biomass was also not observed in summer. These results indicate that the WCM film specifically promotes plant growth in winter. Although plant growth is normally suppressed in winter, the WCM film accelerates plant growth even under weak solar radiation intensity, short daytime, and low ambient temperature. The WCM film promoted the yield of leafy vegetables to a marketable size in comparison to previous reports23,24. We consider that the effective acceleration of plant growth by the WCM film is due to the accumulation of red light during long-term plant cultivation.
Culture and growth analysis of Swiss chard. (a) Photograph of hydroponic culture of Swiss chard covered with WCM film. (b) Plant heights of hydroponic cultured Swiss chard. (c) Relationships between the plant height and the leaf yield calculated from the data at the harvest time in summer and winter. (d) Total plant biomass of hydroponic cultured Swiss chard. The plant height represents the average ± standard error (n = 10). The symbols * and † represent significance at 5% and 10% of Student’s t-test.
Japanese larch trees were cultured using WCM films under sunlight. During one growing season for Japanese larch tree seedlings, the performance of the WCM film as an accelerator to initial growth of a perennial plant was evaluated in a culture experiment (Fig. 3a). We observed significantly higher heights of larch tree seedlings 3 months after sowing (3rd, June 2021). The size of the seedlings with the WCM films was larger than that without the films (control) until the end of the growing season, 22, October 2021 (Fig. 3b). The relative growth rate (RGR) in culture with the WCM film until the end of June was significantly higher than that without WCM. We did not observe a drastic difference between the RGR with and without WCM films in summer and autumn (Fig. 3c). These results indicate that the WCM films positively affected the height growth and acceleration of the initial growth of Japanese larch trees. At the end of the cultivation experiment, the diameter of the stem at soil surface level was 1.2-fold larger in seedlings under WCM film than those under the untreated films (3.70 ± 0.20 vs. 4.51 ± 0.21 mm [± SE]; Student’s t-test, P < 0.001). The total biomass of seedlings was 1.4-fold greater in seedlings under WCM film, with significant increments in thick roots, branches, stems, and leaves (Fig. 3d). A drastic increase in size and biomass was clearly observed using the WCM films. By cultivation with WCM films, the seedling size of a one-year-old larch tree could reach the standard rank for available planting in the forestry of Hokkaido, Japan (> 25 cm seedling height and > 4 mm diameter). The WCM films can shorten the growth period of seedlings from two to one year, contributing to cost-effective production.
Growth of Japanese larch tree seedlings under UV-to-red WCM film. (a) Photograph of 4-month-old Japanese larch seedling grown under UV-to-red WCM film and non-treated film (control). (b) Seasonal change of seedling height. (c) Seasonal change of RGR. RGR was normalized by natural logarithm per week. Open and closed circles denote treatments of the control and WCM films, respectively. Error bars denote standard error. Statistical significance was examined in each month by Student’s t-test (n = 81 and 70, †P < 0.1, *P < 0.05, **P < 0.01, ***P < 0.001). (d) Dry weight of fine roots, thick roots, stem and branch, and leaves. Error bars denote standard error of total biomass. Statistical significance was examined for each organ and whole body by Student’s t-test (n = 38 and 36).
A novel UV-to-red WCM film was prepared by the amorphous formation of a strongly luminescent Eu3+ complex. The present WCM film accelerates the increase in size and biomass of vegetal crops and trees under sunlight. WCM can be easily painted on a commercially available plastic film, and its UV-to-red conversion is achieved by sunlight irradiation without any electric power. Thus, the WCM film can shorten the period of plant production and provide cost-effective and eco-friendly plant growth promotion for agriculture, horticulture, and forestry. It is also important to study the effective plant species for growth acceleration and biomass production using WCM films in future. This painting technology using WCM can be useful for applications in glass-type greenhouses. The Eu(hfa)3(TPPO)2 luminophore has been commercially available, and outside-painted WCM films were not directly attached with plants. In our experiments, the thickness of painted film was found to be 60 μm. Absorption coefficient of the Eu3+ complex at UV area is estimated to be approximately 30,000 cm−1 M−1 at 310 nm. Paint-thickness of this WCM is sufficient for effective absorption of UV light. Overcoating process of WCM may be effective for plant growth. Future luminophore studies and painting technologies promise to provide UV-to-red WCM films with high durability, longevity, high quantum yield, low cost, and appropriate thickness for the plant culture. We also believe that UV-to-red WCM technology can contribute to sustainable development goals (SDGs): SDG2 (zero hunger), SDG7 (affordable and clean energy), SDG9 (industry, innovation, and infrastructure), and SDG15 (life on land).
UV-to-red WCM, [Eu(hfa)3(TPPO)2] (Lumisis E-300, CentralTechno Co., Osaka, Japan), was used without further purification. The amorphous reagent, TDMPPO, was prepared according to a reported procedure28 from commercially available tris(2,6-dimethoxyphenyl)phosphine (Tokyo Chemical Industry Co., Ltd., Tokyo, Japan). The solvents were purchased from Kanto Chemical Co. and used without further purification. A polyolefin-type film (Coating 5 + 1, thickness: 0.1 mm, C. I. Takiron Co., Osaka, Japan) was used for the agricultural plastic covering film. The UV-to-red WCM films were prepared by painting a dichloromethane solution consisting of [Eu(hfa)3(TPPO)2] (20 mM) and TDMPPO (40 mM) on polyolefin-type plastic films.
UV–Vis absorption spectrum was measured in transmission mode by a JASCO V-670 spectrophotometer. The luminescence and excitation spectra were recorded on a HORIBA Fluorolog-3 spectrofluorometer and corrected for the response of the detector system. The luminescence lifetimes were measured using the third harmonics (355 nm) of a Q-switched Nd:YAG laser (Spectra Physics, INDI-50, FWHM = 5 ns, λ = 1064 nm) and a photomultiplier (Hamamatsu Photonics, R5108, response time ≤ 1.1 ns). The Nd:YAG laser response was monitored with a digital oscilloscope (Sony Tektronix, TDS3052, 500 MHz) synchronized to the single-pulse excitation. The emission quantum yields (excitation wavelength: 330 nm) for the WCM films were measured using a JASCO F-6300-H spectrometer attached to a JASCO ILF-533 integrating sphere unit (Φ = 100 mm) in air. The solar radiation spectra were obtained using an Ocean Photonics USB4000 spectrophotometer. The PXRD data were recorded on a Rigaku SmartLab diffractometer with Cu-Kα radiation and a D/teX Ultra detector. Confocal scanning laser microscopy was performed using a Keyence VK-8710 with a 658 nm laser. Temperature of plant surface was measured by infrared camera (NS9500, InfReC, Nippon Avionics Co. Ltd., Kanagawa, Japan).
The ‘Bietola Bianco’ cultivar of Swiss chard (Beta vulgaris var. cicla (L.) K.Koch) was used as the experimental material. The high-functioning cultivar has green leaves and white stalks, which is suitable for the hydroponic culture systems.
The Japanese larch (Larix kaempferi (Lamb.) Carr.) was used as the experimental material. This species is light-demanding and grows relatively fast compared to other conifer trees. Larch species are a major forestry trees in the northern biosphere.
The cultivation experiment was conducted in a greenhouse at the Research and Education Center for Robust Agriculture, Forestry and Fisheries Industry, Hokkaido University, Sapporo, northern Japan (43°04′N, 141°20′E, 15 m a.s.l.).
Before seeding, all seeds (TOKITA SEED Co., Ltd., Saitama, Japan) were sterilized with 70% ethanol for 30 s and rinsed with sterilized distilled water. The seeds were germinated in the dark on wet filter paper in an incubator at 25 °C for several days. After 80% seed germination, the seedlings were transferred to polyurethane foams and then planted in a hydroponic culture system using the nutrient film technique (NFT) in a greenhouse. The root was immersed in a hydroponic solution (guaranteed soluble compounds: N, 80 mg L−1; P, 76 mg L−1; K, 188 mg L−1; Mg, 20 mg L−1; Mn, 0.54 mg L−1; B, 1.1 mg L−1, 500 times diluted solution of Hyponica (Kyowa Co., Ltd., Osaka, Japan). The pH and electric conductivity (EC) were adjusted to 6.5–6.8 and 1.8–2.4 mS cm−1, respectively. The temperature of the hydroponic solution was controlled to 18–22 °C. The hydroponic culture was performed twice: the summer experiment from September 2018 to October 2018, and the winter experiment from October 2018 to January 2019.
To evaluate the responses of the plants to WCM, a simple environment covered with WCM film was created, except for the control treatment without film covering (control). Ten plantlets were cultivated for each treatment and harvested when their plant height reached 20 cm.
Plant height was represented as the maximum length calculated from the sum of the leaf blade and petiole and was measured every 1–2 weeks. The total body biomass above the ground of the Swiss chard was weighed at harvest. The data for each replicate were calculated as the average value for the plantlets. The experiment was arranged in a randomized block design. Statistical analyses, including Student’s t-test and Pearson’s correlation coefficients, were conducted using Statcel4 (OMS, Tokyo, Japan), an add-in form in Microsoft Excel 2004 for Mac.
To evaluate plant growth in response to WCM, two types of plots covered with WCM film and non-WCM film (control) were set up in the greenhouse. The WCM and control plots were repeated three times to form six plots on a line. Before seeding of Japanese larch, all seeds collected in Yubetsu Town, Hokkaido, Japan (mother tree ID: S199) were well-washed and subjected to a cold stratification at 4 °C for one month. The plastic pots (330 mL with inside ribs and slits, HSK330, Hokkaido forests seeds and seedling cooperative association) were filled with a commercial-blend soil medium (coco-peat : Kanuma-soil = 4: 1 (vol/vol); pH 6.0, EC = 0.2 mS cm−1, N = 500 mg L−1, P = 900 mg L−1, K = 750 mg L−1; Container seedling raising soil, Top Co., Ltd, Osaka, Japan), adequately wetted by tapped water. At the end of February, the seeds were sown on potted soils one by one with a cover of a thin soil layer. The automatic spray mist by tap water was irrigated twice a day in the early morning and evening for 5 min in spring and autumn or 10 min in summer. In April, 160 seedlings were grown. In each plot, the positions of the seedling pots were fully randomized and rotated. Additional fertilization of 1000 times diluted solution of HYPONeX (HYPONeX Japan Co., Ltd., Osaka, Japan) was treated 10 times on a weekly basis from 2nd June to August 2021.
The seedling height was measured monthly from June to October 2021. The stem diameter was measured at the soil surface level using a caliper with 0.01 mm accuracy. Half of the seedlings were screened based on their size to reappear in the data distribution and harvested at the end of the growing season, 24, October 2021. After harvest, leaves, twigs, stems, thick roots (> 2 mm in diameter), and fine roots (less than 2 mm) were respectively dried at 70 °C for over 3 days, and the dry weight was measured. The RGR of seedling height was calculated as the ratio of height at the end to the initial height of each period normalized by natural logarithm per week. Statistical analysis was performed using Student’s t-test at every time point.
The authors confirm that all procedures of the experiments, including the collection of plant materials and culturing the plants, complied with relevant institutional, national, and international guidelines and legislation.
The data that support the findings of this study are available from the corresponding authors on reasonable request.
Godfray, H. C. J. et al. Food security: The challenge of feeding 9 billion people. Science 327, 812–818 (2010).
Article ADS CAS Google Scholar
Lambin, E. F. & Meyfroidt, P. Global land use change, economic globalization, and the looming land scarcity. Proc. Natl. Acad. Sci. USA. 108, 3465–3472 (2011).
Article ADS CAS Google Scholar
Lowry, G. V., Avellan, A. & Gilbertson, L. M. Opportunities and challenges for nanotechnology in the agri-tech revolution. Nat. Nanotechnol. 14, 517–522 (2019).
Article ADS CAS Google Scholar
Shang, Y. et al. Applications of nanotechnology in plant growth and crop protection: A review. Molecules 24, 2558 (2019).
Article CAS Google Scholar
Ort, D. R. et al. Redesigning photosynthesis to sustainably meet global food and bioenergy demand. Proc. Natl. Acad. Sci. USA. 112, 8529–8536 (2015).
Article ADS CAS Google Scholar
Batista-Silva, W. et al. Engineering improved photosynthetic in the era of synthetic biology. Plant Commun. 1, 100032 (2020).
Article Google Scholar
Blankenship, R. E. Molecular Mechanisms of Photosynthesis 2nd edn. (Wiley, 2014).
Google Scholar
Folta, K. M. & Childers, K. S. Light as a growth regulator: Controlling plant biology with narrow bandwidth solid-state lighting systems. HortScience 43, 1957–1964 (2008).
Article Google Scholar
Landi, M., Zivcak, M., Sytar, O. & Brestic, M. Plasticity of processes and the accumulation of secondary metabolites in plants in response to monochromic light environments: A review. Biochim. Biophys. Acta Bioenerg. 1861, 148131 (2020).
Article CAS Google Scholar
Rahman, M. M. et al. LED Illumination for high-quality high-yield crop growth in protected cropping environments. Plants 10, 2470 (2021).
Article CAS Google Scholar
Hogewoning, S. W. et al. Photosynthetic quantum yield dynamics: From photosystems to leaves. Plant Cell 24, 1921–1935 (2012).
Article CAS Google Scholar
Huché-Thélier, L. et al. Light signaling and plant response to blue and UV radiations: Perspectives for application in horticulture. Environ. Exp. Bot. 121, 22–38 (2016).
Article Google Scholar
Katsoulas, N., Bari, A. & Papaioannou, C. Plant responses to UV blocking greenhouse covering materials: A review. Agronomy 10, 1021 (2020).
Article CAS Google Scholar
Roeber, V. M., Bajaj, I., Rohde, M., Schmülling, T. & Cortleven, A. Light acts as a stressor and influences abiotic and biotic stress responses in plants. Plant Cell Environ. 44, 645–664 (2021).
Article CAS Google Scholar
Tyystjärvi, E. Photoinhibition of photosystem II. Int. Rev. Cell Mol. Biol. 300, 243–303 (2013).
Article Google Scholar
Turnbull, T. L., Barlow, A. M. & Adams, M. A. Photosynthetic benefits of ultraviolet-A to Pimelea ligustrina, a woody shrub of sub-alpine Australia. Oecologia 173, 375–385 (2013).
Article ADS Google Scholar
Hamada, K. et al. Effects of spectral composition conversion film and plant growth regulators on proliferation of Cymbidium protocorm like body (PLB) cultures in vivo. Environ. Control Biol. 48, 127–132 (2010).
Article CAS Google Scholar
Yoon, H. I. et al. Quantitative methods for evaluating the conversion performance of spectrum conversion films and testing plant responses under simulated solar conditions. Hortic. Environ. Biotechnol. 61, 999–1009 (2020).
Article CAS Google Scholar
Simakin, A. V., Ivanyuk, V. V., Dorokhov, A. S. & Gudkov, S. V. Photoconversion fluoropolymer films for the cultivation of agricultural plants under conditions of insufficient insolation. Appl. Sci. 10, 8025 (2020).
Article CAS Google Scholar
Gudkov, S. V. et al. Development and application of photoconversion fluoropolymer films for greenhouses located at high or polar latitudes. J. Photochem. Photobiol. B. 213, 112056 (2020).
Article CAS Google Scholar
Wu, W. et al. Characterization and properties of a Sr2Si5N8:Eu2+-based light-conversion agriculture film. J. Rare Earths 38, 539–545 (2020).
Article CAS Google Scholar
Wang, D. et al. Polyactide/poly(butylene adipate-co-terephthalate)/rare earth complexes as biodegradable light conversion agricultures films. Polym. Adv. Technol. 30, 203–211 (2019).
Article CAS Google Scholar
Zhang, Z. et al. One-step synthesis of Eu3+-modified cellulose acetate film and light conversion mechanism. Polymers 13, 113 (2021).
Article CAS Google Scholar
Zhang, Z. et al. Ethyl cellulose/rare earth complexes light-conversion films and exploration in acid rain detection. Macromol. Mater. Eng. 307, 2100630 (2022).
Article CAS Google Scholar
Hasegawa, Y. et al. Polymer thin films containing Eu(III) complex as lanthanide lasing medium. Appl. Phys. Lett. 83, 3599–3661 (2003).
Article ADS CAS Google Scholar
Hasegawa, Y. et al. Luminescent polymer containing the Eu(III) complex having fast radiation rate and high emission quantum efficiency. J. Phys. Chem. A 107, 1697–1702 (2003).
Article CAS Google Scholar
Kataoka, H. et al. Photo- and thermo-stable luminescent beads composed of Eu(III) complexes and PMMA for enhancement of silicon solar cell efficiency. J. Alloys Compd. 601, 293–297 (2014).
Article CAS Google Scholar
Kitagawa, Y. et al. Chiral lanthanide lumino-glass for a circularly polarized light security device. Commun. Chem. 3, 119 (2020).
Article CAS Google Scholar
Download references
This work was supported by the Hokkaido University Research and Education Center for Robust Agriculture, Forestry and Fisheries Industry. This work was partially supported by Grant-in-Aid for Cross-departmental Young Researcher Grants from Hokkaido University (to S.S.). This work was partially supported by the Japan Society for the Promotion of Science (JSPS) KAKENHI Grant Numbers JP22K14741 (to S.S.), JP20K21201 (to Y.H.), JP22H02152 (to Y.H.), JP22H04516 (to Y.H.), JP21H02180 (to T.S.), JP19K22902 (to H.S.), JP21K18969 (to Y.K.), and JP20H02748 (to Y.K.). This work was also partially supported by the Institute for Chemical Reaction Design and Discovery (ICReDD), established by the World Premier International Research Initiative (WPI) of MEXT, Japan.
Faculty of Engineering, Hokkaido University, Kita 13, Nishi 8, Kita-Ku, Sapporo, Hokkaido, 060-8628, Japan
Sunao Shoji, Koji Fushimi, Yuichi Kitagawa & Yasuchika Hasegawa
Institute for Chemical Reaction Design and Discovery (WPI-ICReDD), Hokkaido University, Kita 21, Nishi 10, Kita-Ku, Sapporo, Hokkaido, 001-0021, Japan
Sunao Shoji & Yasuchika Hasegawa
Faculty of Agriculture, Hokkaido University, Kita 9, Nishi 9, Kita-Ku, Sapporo, Hokkaido, 060-8589, Japan
Hideyuki Saito, Yutaka Jitsuyama & Takashi Suzuki
Graduate School of Agriculture, Hokkaido University, Kita 9, Nishi 9, Kita-Ku, Sapporo, Hokkaido, 060-8589, Japan
Kotono Tomita, Qiang Haoyang, Yukiho Sakurai & Yuhei Okazaki
Graduate School of Chemical Sciences and Engineering, Hokkaido University, Kita 13, Nishi 8, Kita-Ku, Sapporo, Hokkaido, 060-8626, Japan
Kota Aikawa, Yuki Konishi & Kensei Sasaki
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
S.S., H.S., T.S., and Y.H. discussed and defined the project. S.S., K.A., Y.K., K.S., and Y.K. prepared and analyzed Eu3+-painted UV-to-red WCM films. S.S. and K.S. measured powder XRD patterns of the materials. S.S. and K.F. performed optical microscopic analysis of the WCM film. K.T., Y.S., and Y.J. performed the hydroponic culture and growth analysis of Swiss chard. H.S., Q.H., and Y.O. performed the culture and growth analyses of the tree plants. S.S., H.S., Y.J., T.S. and Y.H. prepared the manuscript.
Correspondence to Sunao Shoji, Hideyuki Saito, Takashi Suzuki or Yasuchika Hasegawa.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Shoji, S., Saito, H., Jitsuyama, Y. et al. Plant growth acceleration using a transparent Eu3+-painted UV-to-red conversion film. Sci Rep 12, 17155 (2022). https://doi.org/10.1038/s41598-022-21427-6
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-21427-6
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
© 2022 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.