Top new questions this week:
|
|
I know why and can understand the logic of changing E-steps for a new extruder- obviously it is related to the number of turns of the stepper. What I don’t understand is how the hotend could alter the …
|
|
I am trying to print an object with this cross section (the full object is just this mirrored): The problem is that big overhang layer. Cura slices it like this: This is obviously going to fail. Is …
|
|
I have created my own tool changer for my 3D Printer but I’m having an issue with the Z-offset for each head. Firmware: Marlin 2.1 Slicer: Cura I have used the offset wizard to get the Z-offset of …
|
|
I’m seriously considering purchasing an Ender 3 Max Neo, but I’m unsure if I’ll be able to fit it on my desk (i.e. I’m not sure if my desk is deep enough) The specs report the machine dimensions as …
|
Greatest hits from previous weeks:
|
|
I bought an Ender 3 two days ago and assembled it today. I think I did it properly, tested the movement of all axes which works for all axes. Then I performed the calibration as described in the …
|
|
I´ve have read an article to change different pattern depending on amount of layers, but my question is if is possible to have different infill in the same part? For example: Base: has the infill of …
|
|
I need to set a Z offset for the Flying bear P902. I calculated the offset (-2.98). But, every time when I try to input this using the LCD screen of my 3D printer, the value jumps to either -2.99 or -…
|
|
I could have sworn I read somewhere that when printing with TPU to make sure the part cooling fan is blowing. But I just did a quick Googling and couldn’t find anything stating such on Matter Hackers …
|
|
I have a new BLTouch that is setup (using Marlin 1.8.7) but I want to increase the probing grid from a 3×3 to something like a 5×5. I am using bilinear leveling with a 3×3 grid. How would I go about …
|
|
The surfaces of my printed parts using PLA plastic look rough and uneven. Would changing filament to a better one make any difference? If not, what kind of methods can I use to achieve a smoother …
|
|
Anyone have any idea how much power it takes to run a Creality Ender 3 3D printer every day for several hours at a time? Like what does it eat up per hour? A rough estimate of power use per hour would …
|
