Top new questions this week:
|
|
Where I live, Raspberry Pi is currently* either unavailable, at prices 3 times higher than a year before, or sold online as “untested”. Or straight up as not working. So I am not getting one….
|
|
Does anyone know of a method, app, technique to “dumb down”, if you will, larger models to do a quick initial print to check that it fits the real world proof of concept that it was designed …
|
|
I have created a Mengersponge in OpenScad which is a 3D object. I wanted to get an SVG export from it for the laser cutter but I receive this error:”Current top level object is not a 2D object.&…
|
|
I have a Raise3D Pro2, which if you are not aware, is one of the most overbuilt, overpriced printers that lacks some of the most basic features of an Ender costing 1/10th the price. One of which is …
|
|
This might be considered a “Windows” question, but since it only happens with the Ender, I thought I would post it here. I have a Windows 10 laptop connected to my Ender 3 V2, and I use …
|
|
I upgraded my Ender 3 with a new Mobo, the 4.2.7 version. My current setup is: Printer Specifications: Ender 3 Upgraded Motherboard 4.2.7 (Silent Stepper Drivers) Marlin FW Upgrade to Version 2.1.x …
|
Greatest hits from previous weeks:
|
|
When printing cube.gcode using Pronterface I get: Print started at: 23:07:31 After 8 seconds I get: …
|
|
In setting up a probe for automatic bed leveling, the limits of the probing area must be entered in the firmware of a 3D printer. When using a sensor, how do you define the bed limits for the sensor …
|
|
I’m having issues with ripples on the first layer of big flat prints. The initial corner of a big flat print is fine, but then ripples begin to form as shown in the screenshot. I’m just a newbie, so …
|
|
Occasionally, while printing, my y axis will slip and the layer will, from that point forward, be shifted, ruining the print. What might be the causes of an axis slipping? I have tried cooling the …
|
|
Whenever a 3D printer that uses linear rails is announced (case in point: the cetus), the Internet (well… at least that corner of it dealing with 3D printing) gets abuzz with excitement. I …
|
|
Nozzle diameter = .4 Extrusion multiplier = 1 Extrusion Width = .45 <– I feel like this could be reduced to fix it? Layer Height = .3 I’m using Simplify3D….
|
|
I have just upgraded my board to TH3D’s EZBoard Lite with their Unified Firmware (U2.R1.15) and whilst dialling in all the setting I have found that using the BlTouch each time to be frustrating …
|
